STS is an escrow service that protects both buyers and suppliers. Funds are held securely by Made-in-China.com until order terms (e.g., delivery, quality) are fulfilled
| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | 1year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
Payment Guarantee
Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Inspection Service
After-Sales & Dispute Handling
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | SY804G |
| Horsepower(hp) | 80 |
| Type | 4×4 Wheeled tractor |
| Overall dimension(mm) | |
| length | 3500 |
| width | 1850 |
| Height | 2700 |
| Tread(mm) | |
| Front Wheel | 1450 |
| Rear Wheel | 1408 |
| wheel base(mm) | 2020 |
| Ground Clearance(mm) | 420 |
| Structure weight(kgs) | 2660 |
| Front Wheel ballast(kg) | 144 |
| Rear Wheel ballast(kg) | 360 |
| Engine | |
| Type | vertical, water cooled, four cylinder,four stork |
| Rated rev. (r/min) | 2300 |
| Rated power (KW) | 58.8 |
| clutch | Dry-friction,double stage |
| Transmission system | |
| gearbox | 12F+12R shuttle shifts |
| Tractor brake | Hydraulic brake,discs |
| central transmission | Gear sector |
| Tyre | |
| front wheel | 8.3-24 |
| Rear wheel | 11.00-32 |
| PTO shaft rev. | 540r/min and 760r/min |
1.How to solve the problem of insufficient traction and frequent slippage of tractors during operation?
• Enable four-wheel drive mode: If it is a four-wheel drive model, it is necessary to switch to four-wheel drive during operation (especially when farming or climbing) to improve ground adhesion and reduce slipping.
• Increase counterweight: Install counterweight iron at the rear of the tractor (such as the suspension frame), or fill the tires with water/install anti-skid chains (on muddy or soft terrain) to increase the weight of the body and enhance traction.
Adjust homework parameters: If it is a load operation such as farmland, it is advisable to reduce the plowing depth of agricultural tools and slow down the operation speed appropriately to avoid exceeding the power carrying range of the tractor.
2.What are the reasons why the hydraulic suspension system of a tractor cannot lift or lower slowly?
Check hydraulic oil: Confirm whether the oil level in the hydraulic oil tank meets the standard and whether the oil has deteriorated (such as blackening or impurities). If it is insufficient or deteriorated, it should be replenished or replaced in a timely manner.
• Check the hydraulic pipeline: check whether the hydraulic pipeline is broken, whether the joints are loose, and whether there is any oil leakage; At the same time, clean the hydraulic oil filter to avoid blockage that may cause poor oil flow.
Check the hydraulic pump/valve: If the above is normal, it may be due to wear of the hydraulic pump (insufficient pressure) or stuck control valve, and professional personnel should be contacted for maintenance.
){kind=link}